Still a work in progress. Board is very small (62 x 50 mm) and currents this large on such a small board may cause temperature problems even with a beefy top mount heatsink on the power FETs. This will need to be investigated thoroughly when the first round of PCBs come in from the manufacturer.
First iteration Gerbers have been submitted and parts are being ordered for initial testing/debugging.
Github code repository for the STM32 MCU will be here in the next few days as I begin to work on it.
Known bugs: I2C header currently is not an I2C header as connected pins cannot be mapped to the STM32 MCU I2C peripheral. Mistake was made when reading the datasheet. I2C would need to be bit-banged in-order to provide support.