DETAILED DESCRIPTION
A small 4 way distribution amplifier that fits inside the BG7TBL 2016-05-31 GPSDO with configurable square or sine wave outputs.
Can be configured with square wave or sine wave output based on populating or bridging the final stage passives, input is a square wave tapped off from GPSDO internal circuitry (works with both square and sine variants) and sized to fit above the heatsink found in the BG7TBL GPSDO 2016-05-31 variant (others as well, but not much older board configurations).
Output is approx. 2Vpp square wave or 1Vpp sine wave configurable per channel built as specified. Parts are around $12 US, with the vast majority of the cost in the 4 BNC connectors.
Full assembly documentation as well as a discussion of the design and performance can be found here: http://medpants.com/distribution-amplifier
Authors
- /
- Active Participants
Components & Releases
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()