DETAILED DESCRIPTION
The little circut has a 85-260VAC to 12VDC converter on the front of it. I'll wire it behind the Dust Collector (110VAC) and Compressor (220VAC) switches. With the trim pot I can adjust the on-time between say 3 and 30 seconds.
On the Dust Collector it will temporarly illuminate the translucent barrel so I can see how it full it is.
On the Compressor it will briefly run a purge valve connected to the moisture drain on the compressor, 5-10 seconds of purge every time the compressor kicks on will help keep moisture from building up in the tank.
Was a little bored this afternoon...
Authors
- /
- Active Participants
Components & Releases
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()