DETAILED DESCRIPTION
I've tried most other Teensy breakout boards on the market, and while many are very good, most missed the mark for what I needed. Some were too large, offering access to way more than needed for my project. Others were too simplistic and left out much needed capability. Hopefully this fills the gap in between.
This board allows easy access to I/O pins with ground and voltage rails nearby.
This was made for a specific project where I needed to plug in sensors easily, with access to Teensy's input pins, voltage and ground nearby. However, this board could also be used for some other applications. There are some other breakouts out there, but this one offers a balance of size and functionality that others do not.
Please note: This is my first ever board, so there are some improvements I'd like to make. Things to know: - Holes are 0.762mm, so a bit tight, but the Teensy footprint is correct, and everything works as it should. Recommend needle nose pliers to gently place your headers. - Ground trace is a bit thin, so be careful not to blow it! - I purposely designed this to only handle the pins along the edges, so if you need access to the pins underneath the Teensy, you may want to try another board. - Should fit other Teensy 3.x boards, but was made for 3.2.
If you'd like one of these boards, head over to my Tindie store.
Authors
- /
- Active Participants
Components & Releases
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()