Loading project. Please wait...
DETAILED DESCRIPTION
Designed for Playing, Learning and Hacking (by FEDEVEL Academy)
Completely Open Source. Based on NXP (Freescale) i.MX6 CPU. Arduino & Raspberry Pi like headers. All documents are free for download, including Schematic and PCB.
Specification
- NXP (Freescale) i.MX6 processor, up to 1.2GHz / 4 cores
- NXP microcontroller LPC13xx (Default: LPC1345FHN33)
- Soldered down DDR3-1066 (533MHz), up to 4GB
- 1x 10/100/1000 Mbps Ethernet
- 1x HDMI Output (up to QXGA 2048×1536)
- 1x Parallel CSI Camera input or RGB Parallel Display output
- 1x Differential Camera Input (Compatible with Raspberry Pi) or LVDS display output
- 1x SATA
- 1x micro SD
- 1x PCIE mini slot (PCIE & USB & SIM)
- 1x USB OTG Micro
- 2x USB
- 1x CAN transceiver
- 1x Compass + Accelerometer
- 1x Gyroscope
- 1x Humidity sensor
- 1x Temperature sensor
- 1x Audio (Headphones output, Microphone input)
- 1x Touchscreen connector (Touchscreen through LPC13xx / Optional 4x Analog input)
- 1x I2C EEPROM
- 1x SPI FLASH
- 1x IR Receiver
- 1x Arduino type header. Default:
- 4x Analog input
- 3x GPIO
- 1x I2C
- 1x CAN
- 1x USB
- 1x Raspberry PI type header. Default:
- 2x I2C
- 2x UART
- 1x CAN TX/RX
- 2x SPI
- 3x GPIO/PWM
- 1x UART Debug console (FTDI compatible)
- 8+2 USER LED
- Power LED, SD Card LED, USB HUB LED
- 1x Reset button, 3x User button (e.g. Home, Volume Up, Volume Down)
- Size: 70 x 95 mm (2.75 x 3.75 inch)
- Input power: 5V DC (through Power Jack or USB micro)
Go to the OpenRex Project Home Page >
Do you want to learn how to design boards like this?
We created number of courses about Schematic & PCB Design based on our open source projects. During the courses you will learn & practice on boards like this. Go on our website: FEDEVEL Academy - Learn Schematic & PCB Design Online
Authors
- /
- Active Participants
Please wait...
Components & Releases
There are no components or releases to display
Components
Please wait...
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()