Loading project. Please wait...
DETAILED DESCRIPTION
This board is used for the SCI640DNW test setup for the HEP (vacuum) configuration. It does the following:
- Serves as the ambient-side adapter board, which interfaces between the vacuum flange and the driver board in the Fishcamp camera electronics.
- Converts the driver board signals on Samtec connector into same signals on a MDM connector. The MDM connector mates directly to the vacuum flange.
- Brings in the negative HV power supplies DPW_core, DPW-ring and V_BACK into the MDM connector. (These HV power supplies are not available from the Fishcamp camera electronics.)
Authors
- /
- Active Participants
Please wait...
Components & Releases
There are no components or releases to display
Components
Please wait...
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()