Loading project. Please wait...
DETAILED DESCRIPTION
The chipKIT Fubarino SD is a breadboard form factor chipKIT board with a powerful PIC32 processor that can run Arduino sketches. It also sports a microSD connector for extended data storage on board. The chipKIT Fubarino SD uses the built-in USB peripheral of the PIC32 to both bootload new sketches as well as communicate with the PC (over a virtual serial port).
The Board Design
- PIC32MX795F512H - 512K Flash, 128K RAM @ 80MHz 32-bit MIPS core
- MPIDE (MultiPlatform IDE - a fork of the Arduino IDE) supports Fubarino SD board out of the box
- 45 Digital IO (many are 5V tolerant)
- 15 Analog inputs (10-bit)
- 2 hardware serial ports (UARTs) - one accessible on pins 28 (rx) and 29 (tx), the other on pins 8 and 9, plus a serial connection over USB (12Mbps)
- Comes with headers for easy mounting on a breadboard
- Directly compatible with 3.3V devices. No level converting necessary.
- Small form factor - easy to integrate into your project
- Great for projects that need two hardware serial ports plus a USB connection and file storage
- Easy to program, no additional hardware is required to load sketches – just plug into a USB port and run MPIDE
- Can be used as USB to microSD adapter
- ICSP Header for use with optional Microchip hardware programmer/debuggers (like PICKit3, ICD3 or REAL ICE)
- Can be powered through USB, or 2.3V to 13V DC input power
- Extra power and ground pins for ease of wiring into your project
- microSD slot connected to the PIC32 hardware SPI port
- microSD card accessible for large file access from your sketches
- USB bootloader (avrdude compatible) for seemless sketch uploading within MPIDE
Authors
- /
- Active Participants
Please wait...
Components & Releases
There are no components or releases to display
Components
Please wait...
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()