DETAILED DESCRIPTION
This is a venerated circuit. It is a highly robust workhorse that will do well in any design requiring good low-noise linear regulators for both positive and negative 15 volt rails as used in most audio opamp based electronic devices.
The DC-DC converter module based on the popular LM2596S "Simple Switcher" is an adjustable regulator and used here to provide the +5V power for any digital logic or microcontrollers you might have hangning around in the design as well.
I routed with nice wide traces and polygon for GND so that this could be quickly milled by the Bantam Tools Desktop PCB Mill in several minutes on a single layer of FR-1 blank copper clad laminate.
Authors
- /
- Active Participants
Components & Releases
Fabricate
Delete release
Are you sure you want to delete this Release?
This action cannot be undone.
Unable to download from CircuitMaker
You cannot download files inside CircuitMaker.
Please, open this page in browser and download file from there.
To copy hyperlink, press Ctrl+C with selected text below:
Comments ()