This Updater use ArduinoAsISP system to upload new firmware on my DCC Decoder Boards via JST SH6 interface, the programmer permit to program CVs stored in decoder EEPROM with I2C Bus.
Programmer has DCC Signal generator based on DCC++ system to has a ProgramTrack to read and write CVs when decoder is mounted on model.
Are available ExpansionPort and SoundPort to programming, updating and testing expansion modules, is also include a 1.25mm connector to external speaker.
[ FEATURES ]
- MCP2200 USB 2.0 to UART chip
- ATMEGA128A to provide multiple functions (with BootLoader for firmware update via USB)
- ISP connector to programm ATMEGA128A with external ISP programmer
- Selector to ISP or I2C/DCC mode
- Selector to able I2C PullUp resistors
- ISP debug LEDs
- DCC Generator based on DCC++ (arduino MotorShiel) system
- DC Input (for DCC Generator): 12 to 20v
- Standard Conncector for Porgramming Track
- ISP/I2C port for Decoder
- ExpansionPort and SoundPort for Expnasion Modules
- 1.25mm connector for external speaker
LAST REVISION: 2.20 Beta
LAST VERSION TESTED: x.xx