This is a replacement hot end PCB for the Anycubic i3 Mega which provides an additional FAN3 2.54 pitch socket for standard fans, connections for BLTouch and an additional 2.54 pitch socket for an LED connection.

I was not able to locate a suitable replacement 14 pin socket for the main connector back to the mainboard so utilised 2x 2.0 pitch 7 pin connector and removed the shroud off it after soldering. I then removed the existing shroud from the original socket and placed this on the new PCB.

Resistors on board drop the voltage to 9V for the LED and 5V for the BLTouch.

The board will not fit back into the original position so will need to be mounted on top of the hot end cover.

I am in the process of creating the mount and will up the description with links once finialised.

Any questions please send me a message.